Rubber flooring is very easy to sanitise. On our premises we've tried two ways:

- Wash with hot water only;

- Wash with cold water and add a small amount of bio-alcohol, which will have a disinfectant effect on the floor.

Any of the above will be an excellent solution for making your floor look as good as new.

Simply lay the tiles in the desired location. Due to the high weight of each tile - 15mm is 13kg and 25mm is 22kg - it will not be necessary to glue the floor to the ground.

We do not recommend gluing the floorboards down.

You can cut the edges of the floor with a new blade.

The 25mm tiles will be a little more difficult to cut, but the other thicknesses, both in rolls and tiles, are easy to cut.

We don't recommend using this flooring outdoors, as temperature fluctuations and bad weather tend to warp and wear out the rubber more quickly.
For outdoor use, we recommend SBR rubber tiles, which are commonly seen/used in children's playgrounds (link below).

RUBBER TILE FLOOR SBR